Esco Ascent Max Series Ductless Fume hoods

Buy Now

The Esco Ascent™ Max Ductless fume hood offers excellent protection against chemical fumes when handling chemicals in a laboratory environment. The Ductless design uses long life carbon filters to remove the chemical vapours and recycles the clean air back into the laboratory to provide energy saving benefits. The cabinets come fully assembled which makes them easy to install and removes the requirement to install an expensive extraction system in order to operate.

Fume Hoods are available in 2,3,4,5,6ft sizes.

·        A choice of 8 carbon activated filters to choose from

·        Option to purchase a cabinet with a secondary carbon filter installed to cover a wider range of chemical handling applications

·        Sentinel™ Microprocessor Control interface with an audible alarm system

·        Optional VOC sensor can be fitted to alarm when the filter has reached saturation

·        Easy to service as the filters and lamps are accessible on the front of the unit 

·        Stainless Steel worktop included as standard (Option to upgrade to an Epoxy or Resin work surface to improve chemical resistance)

·        Isocide coating to eliminate cross contamination

·        Low Noise Level

·        A clear transparent back wall is available for maximum visibility which is ideal when conducting demonstrations

·        Fixed or Mobile support standard are available

 

Optional VOC sensors, PP drip cup & service fixtures are available on request. Please contact our technical team for more information and to obtain a customised quotation.

Technical Specification
General Specifications, Frontier®  MonoTM  Fume Hoods                  
Model 220-240 VAC, 50/60 Hz, 1Ø EFH-4A8
2090135
EFH-5A8
2090142
EFH-6A8
2090148
                 
110-120 VAC, 50/60 Hz, 1Ø EFH-4A9 2090314 EFH-5A9 2090315 EFH-6A9 2090147                  
Nominal size 1.2 meter (4') 1.5 meter (5') 1.8 meter (6')                  
External Dimensions (W x D x H) 1200 x 873 x 1500 mm
(47.2” x 34.4” x 59.1”)
1500 x 873 x 1500 mm
(59.0” x 34.4” x 59.1”)
1800 x 873 x 1500 mm
(70.9” x 34.4” x 59.1”)
                 
Internal Work Area, Dimensions (W x D x H) 1120 x 682 x 1435 mm
(44.1” x 26.9” x 56.5”)
1420 x 682 x 1435 mm
(55.9” x 26.9” x 56.5”)
1720 x 682 x 1435 mm
(67.7” x 26.9” x 56.5”)
                 
Exhaust Volume / Static Pressure Required
Face Velocity of 0.5 m/s (100 fpm) at Full Open Sash
1109 cmh at 68 Pa
(653 cfm at 0.27" WG)
1406 cmh at 80 Pa
(827 cfm at 0.32" WG)
1703 cmh at 88 Pa
(1002 cfm at 0.34" WG)
                 
Exhaust Outlet Diameter and Material 250 mm (10.0"), PVC 250 mm (10.0”), PVC 305 mm (12.0"), PVC                  
Fluorescent Light Intensity 791 lux (73.5 foot-candles) 1011 lux (94 foot-candles) 1231 lux (114 foot-candles)                  
Construction Main Body EG steel with aluminum and oven-baked Epoxy-polyester hybrid Isocide™ powder coating                  
Internal Liner Esco ResinateTM  Phenolic Resin laminates                  
Interior Baffle System Esco ResinateTM  Phenolic Resin laminates                  
Airfoil Stainless Steel grade 304                  
Worktop No built-in worktop for the fume hood unit. The phenolic dished work top is included with the base cabinet                  
Sash Specification Sash material Frameless tempered safety glass                  
Sash configuration Vertical                  
Sloping No sloping                  
Maximum Sash Opening 550 mm (21.7")                  
Power Consumption 25 W (Fluorescent Lighting Only)                  
Electrical* Cabinet Full Loads Amps (FLA) 7 A                  
Optional Outlets  (FLA) 6 A                  
Cabinet Nominal Power 60 W 100 W                  
Cabinet BTU/Hr 205 341                  
Controller Rocker Switches                  
Net Weight** 120 Kg (264 lbs) 155 Kg (342 lbs) 180 Kg (397 lbs)                  
Shipping Weight** 199.0 Kg (439 lbs) 210.0 Kg (463 lbs) 226.3 Kg (499 lbs)                  
Shipping Dimensions, Maximum** (W x D x H) 1300 x 950 x 1940 mm
(51.2" x 37.4" x 76.4")
1650 x 950 x 1940 mm
(65.0" x 37.4" x 76.4")
1950 x 950 x 1940 mm
(76.8" x 37.4" x 76.4")
                 
       
   
     
 
Note: EFB only shipped unassembled, minimum order quantity is 2 units per size, units can be double / triple stacked on a pallet.
** Cabinet BTU = Cabinet nominal power x 3.41214
***Fume hood unit only. Excludes base cabinet/ optional stand.
Write Your Own Review
You're reviewing:Esco Ascent Max Series Ductless Fume hoods
BUYING OPTIONS

Please swipe right and left to horizontal scroll the buying options.

Ascent® Max Ductless Fume Hoods - Standard
Product Code Description List Price Offer Price
2040078 Ascent® Max Ductless Fume Hoods, 6ft/1.8m - Standard POA POA ENQUIRE
Ascent® Max Ductless Fume Hoods - With Secondary Backup Carbon Filter
Product Code Description List Price Offer Price
Ascent® Max Ductless Fume Hoods - With Transparent Back Wall
Product Code Description List Price Offer Price
Ascent® Max Ductless Fume Hoods - With Secondary Backup HEPA Filter
Product Code Description List Price Offer Price
Get in touch with us on 01939 234222

Need further assistance or can't find what you're looking for? Please complete all details of your enquiry and we will get back to you shortly.

  • I would like to receive updates about products & services, promotions,special offers, news & events from SciQuip Ltd.

Certified to ISO9001 & ISO14001

MORE

more cta
SciQuip Supports
more cta
Microscopes
From £150
more cta
TITAN Pipette Filler
Special Offer £115
more cta
SciQuip Vortex Mixers
From £84

If you're unable to find the scientific or medical laboratory equipment supplies you're looking for, please do not hesitate to contact SciQuip Technical Sales Support on 01939 234222 or by email at info@sciquip.co.uk