Sigma 6-16KS Refrigerated Centrifuge

  • Universal table top centrifuge; speed range up to 13.500rpm
  • Control unit Spincontrol Comfort or Professional
  • Various angle and swing-out rotors available
  • Lid can easily be opened due pneumatic swing support
  • Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket
  • Maintenance-free induction drive motor;
  • A Microcontroller controls speed, time, temperature and gravitational field
  • Motorized lid lock
  • Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm
  • Magnetic rotor identification prevents the rotor from overspeeding
  • Stainless steel bowl
  • Imbalance switch
  • No need to open the casing for emergency lid lock release
  • Produced according to national and international safety regulations (e.g. IEC 1010).
  • Calibration certificate avaliable at an additional cost - please enquire for a quote

 

 

As the officially appointed Sigma centrifuge sales and service specialist within the uk, we have vast experience in the specification, application and installation of their full range of centrifuges and if the model you require is not listed please feel free to call us on 01939 234 222 or contact us below.

Technical Specification

 

Technical Data

 6-16KS

 Power supply

 220-240 V, 50/0 Hz
208 V, 60 Hz
200 V, 50/60 Hz
120 V, 50/60 Hz

 Power consumption [W]

 2,000

 Max. capacity [ml]

 4 x 800

 Max. speed [rpm]

 15,000

 Min. speed [rpm]

 100

 Interference suppression

 EN  61326

 Height x Width x Depth [mm]

 485 x 790 x 711

 Height with open lid [mm]

 990

 Weight without rotor [kg]

 158

 Kinetic energy max. [Nm]

 154,007

 Noise level at max. speed (approx.)
- Rotor 12600
- Rotor 11650+13650 

63 dB (A)
63 dB (A)

 Max. acceleration
- Rotor 11650+13650 [sec]

- Rotor 12600 [sec]

 52

168

 Temperature adjustment range

 -20 – +40

Spin Control

Spincontrol Comfort

 Spincontrol Professional

 Display

 Grafik LCD

 TFT

 Plain text pop up window

 +

 +

 Permanent display preselected, current values

 +

 +

 Languages

 D, GB

 D, GB

 Timer

 10sec – 9h 59min

 10sec – 9h 59min

 Timer after set speed has been reached

 -

 +

 Time increments [sec]

 60; 1

 60; 1

 Short run

 +

 +

 Continous run

 +

 +

 Speed increments [rpm]

 100; 1

 10; 1

 Display speed and g-force

 +

 +

 G-force increments [xg]

 10; 1

 10; 1

 Temperature increments [°C]

 1

 1

 Switchable °C, °F

 -

 +

 Standstill cooling, switchable

 +, +

 +, +

 Standstill heating, switchable

 +, +

 +, +

 Rapid cooling program: Rapid_cool

 +, +

 +, +

 Start refused with exceeded temperature tolerance, tolerancepreselectable

 -

 +

 Programs

 50

 60

 User defined program name

 -

 +

 Program list shows all parameters

 +, +

 +, -

 Linear acceleration curves

 10

 10

 Quadratic deceleration curves

 10

 10

 User defined acceleration curves

 10

 10

 Linear deceleration curves

 10

 10

 Quadratic deceleration curves

 10

 10

 User defined deceleration curves

 10

 10

 Brakeless

 +

 +

 Combination deceleration a. brakeless from 1000 – 150 rpm selectable

 -

 +

 Auto lid open, switchable

 +

 +

 Accoustic signal, switchable

 +, +

 +, +

 Signal length preselectable

 +

 +

 Optical display stillstand

 +

 +

 Counting cycles centrifuge, each rotor

 +, +

 +, +

 Pop up window end of rotor life time

 +

 +

Automatic lid opening at the end of the run, switchable

 +, +

 +, +

All rotors are programmed: speed, g-force, radius

 +

 +

 Max. radius decreasealbe

 +

 +

 Calculation for liquid density >1.2g/cm3

 +

 +

 Start delay

 +

 +

 Controlunit lockable

 +

 +

 Code protection

 +

 +

As the officially appointed Sigma centrifuge sales and service specialist within the uk, we have vast experience in the specification, application and installation of their full range of centrifuges and if the model you require is not listed please feel free to contact us on 01939 234 222 or below.

Write Your Own Review
You're reviewing:Sigma 6-16KS Refrigerated Centrifuge
BUYING OPTIONS

Please swipe right and left to horizontal scroll the buying options.

Product CodeDescriptionList PriceOffer Price
10395Sigma 6-16KS, refrigerated table top centrifuge, 220-240 V, 50 Hz
£17,283.00
£11,801.00
ADD
Accessories

Please swipe right and left to horizontal scroll the buying options.

Swing-Out Rotors & Buckets
Product CodeDescriptionList PriceOffer Price
11650Swing-out rotor, 4 place, for buckets 13421, 13450, (13621, 13625, 13635, 13650 only in 6-16S, 6-16KS)
£2,583.00
£1,650.00
ADD
11660Swing-out rotor, stainless steel, 4 place, for buckets 13421, 13450, (13460 only in 4-5L), (13621, 13625, 13635, 13650 only in 6-16S, 6-16KS)
£2,680.00
£1,711.00
ADD
13460Rectangular bucket, Biosafe certificate, incl. 1 set caps 17460, for rectangular adapter no. 18460, 18461, 4-5L only, 1 set = 2 pcs.
£1,591.00
£1,017.00
ADD
13621Bucket for microtiter plates, max. height of plates 86 mm, incl. plate holder no. 17980, 1 set = 4 pcs
£5,102.00
£3,233.00
ADD
13650Round bucket, Biosafe certificate, sealable with cap no. 17170, for round adapters Ø 100 mm, (no. 17651 - 17699), for 800 ml tube no. 13656, adapter no. 13654, 13655, max. tube length 145 mm, 1 set = 2 pcs
£1,492.00
£954.00
ADD
Adapters for Bucket 13650
Product CodeDescriptionList PriceOffer Price
136541 x 500 ml, Ø 85 x 130 – 173 mm, e.g. no. 15500, 15501
£343.00
£220.00
ENQUIRE
13655Adapter for 1 bottle 500 ml
£287.00
£184.00
ADD
13656Polypropylene tube with flat bottom
£117.00
£75.00
ADD
17652Round carrier for 36 round bottom tubes 5 ml, max. ÕÉ 12.5 x 60 - 80 mm, e.g. no. RIA tubes 15060, hemolyse tubes, 1 set = 2 pcs
£373.00
£239.00
ADD
17653Round carrier for 26 reaction vials 1.5/2.0 ml, max. Ø 11 mm, e.g. no. 15008, 15040, 1 set = 2 pcs
£373.00
£239.00
ADD
17654Round carrier for 32 round bottom tubes approx. 7 ml, max. Ø 12.5 x 85 - 115 mm, e.g. no. 15007, 15027, 1 set = 2 pcs.
£373.00
£239.00
ADD
17655Round carrier for 20 round bottom tubes 10 - 12 ml, max. Ø 16.2/18 x 65 - 90 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs
£373.00
£239.00
ADD
17656Round carrier for 22 round bottom tubes 5 - 6 ml, max. Ø 13.5/17.5 x 70 - 90 mm, e.g. no. RIA tubes no. 15060, Vacutainer, hemolyse tubes, 1 set = 2 pcs
£373.00
£239.00
ADD
17658Round carrier for 19 round bottom tubes 9 - 15 ml, max. ÕÉ 17.2/19.5 x 85 - 115 mm, e.g. no. 15015, 15020, 15022, 15023, 15024 and Monovettes 9 - 10 ml, 1 set = 2 pcs
£373.00
£239.00
ADD
17659Round carrier for 12 culture tubes 15 ml no. 15115 with caps Ø max. 23 mm, 1 set = 2 pcs.
£373.00
£239.00
ADD
17660Round adapter for 15 x 15 ml conical culture tubes, *only without cap no. 17170, 1 set = 2 pcs.
£373.00
£239.00
ADD
17662Round carrier for 7 tubes 30 ml, flat bottom or skirt, max. Ø 25/31 x 65 - 95 mm, e.g. Sterilin 128A, 128B, 128C, 128BBAC, Sarstedt 62.543, 62.543.001, 62.543.027, 62.543.030, 1 set = 2 pcs
£373.00
£239.00
ADD
17670Round carrier for 8 round bottom tubes 25 - 30 ml, max. ÕÉ 25.4/30 x 90 - 115 mm, e.g. no. 15025, 15026, 15029, 15030, 15032, 15033, 1 set = 2 pcs
£373.00
£239.00
ADD
17675Round carrier for 4 round bottom tubes 50 ml, max. Ø 35/38 x 90 - 115 mm, e.g. 15045, 15049, 15056, 15050, 1 set = 2 pcs
£373.00
£239.00
ADD
17676Round carrier for 7 round bottom tubes 40 - 50 ml with screw cap, max. Ø 29/32 x 90 - 115 mm, e.g. 13055, 15051, 15052, 1 set = 2 pcs.
£373.00
£239.00
ADD
17677Round carrier for 5 culture tubes 50 ml, e.g. no. 15151, Nunc, Corning, Falcon and Greiner, 1 set = 2 pcs
£373.00
£239.00
ADD
17678Round carrier for 5 culture tubes 50 ml with skirt or flat bottom, max. Ø 29.4/36 x 90 - 120 mm, 1 set = 2 pcs.
£373.00
£239.00
ADD
17679Round carrier for 7 culture tubes 50 ml, e.g. no. 15151, 1 set = 2 pcs.
£373.00
£239.00
ADD
17682Round carrier for 1 bottle 500 ml conical, Corning no. 431123, angle 75ë, ÕÉ 96 x 150 mm, 1 set = 2 pcs
£373.00
£239.00
ADD
17685Round carrier for 3 tubes 78 - 85 ml, max. ÕÉ 38/40 x 90 - 110 mm, e.g. no. 13085, 15076, 15080, 1 set = 2 pcs
£373.00
£239.00
ADD
17690Round carrier incl. rubber cushion no. 16051, for 2 round bottom tubes approx. 100 ml, max. ÕÉ 45/47 x 85 - 110 mm, e.g. no. 15078, 15100, 15103, 15106, 1 set = 2 pcs
£373.00
£239.00
ADD
17692Round carrier for 1 bottle with flat bottom approx. 125 ml, max. Ø 51 x 90 - 115 mm, e.g. no. 15125, 1 set = 2 pcs.
£373.00
£239.00
ADD
17693Round carrier for 1 bottle approx. 200 - 250 ml, conical, angle 60°, max. Ø 61.5 x 140 - 164 mm e.g. no. Nalgene 200 ml no. 3143-0175, Nunc 200 ml no. 376813, Corning 250 ml no. 430776 not for 13450, Termo-Nunc 250 ml, no. 376814, 1 set = 2 pcs
£373.00
£239.00
ADD
17694Round carrier for 1 bottle 150 - 250 ml conical, angle 88ë, max. ÕÉ 61 x 120 - 140 mm, e.g. Falcon 175 ml no. 352076, Falcon 225 ml no. 352075, Labcon 175 ml no. 3080-820-000, VWR 175 ml no. 89218-280, -282, Labcon 250 ml no. 3081-820-000, VWR 250 ml no
£373.00
£239.00
ADD
17696Round carrier for 1 bottle with flat bottom approx. 200 ml, max. ÕÉ 57 x 90 - 115 mm, e.g. no. 15202, 1 set = 2 pcs
£373.00
£239.00
ADD
17698Round carrier for 1 bottle with flat bottom 250 ml, max. ÕÉ 61.5 x 90 - 125 mm, e.g. no. 13255, 15247, 15249, 1 set = 2 pcs
£373.00
£239.00
ADD
Adapters for Bucket 13460
Product CodeDescriptionList PriceOffer Price
18460Rectangular adapter for 25 tubes, max. Ø 17.2/19.5 x 85 - 115 mm, 1 set = 2 pcs
£445.00
£287.00
ADD
18461Rectangular adapter for 35 tubes, max. Ø 13.5/17.5 x 70 - 106 mm, 1 set = 2 pcs.
£445.00
£287.00
ADD
Oil Tube Rotors & Buckets
Product CodeDescriptionList PriceOffer Price
11165Swing-out rotor, 4 place, for buckets no. 13113, 13114, 13116 for glass tubes for mineral oil
£1,830.00
£1,171.00
ADD
11166Swing-out rotor 4 x 100 ml complete, no. 11165, incl. 2 sets buckets no. 13113, 4 mineral oil glass tubes 8“ following former ASTM D91/96 no. 15130 and 2 sets adapters no. 16103, (13113 sealable with cap no. 17107)
£4,377.00
£3,043.00
ADD
13113Round bucket sealable with cap no. 17107, for 1 glass tube for mineral oil 100 ml, 8"", Ø 37 x 203 mm, following former ASTM D 91/96 no. 15130, incl. adapter no. 16103
£935.00
£598.00
ADD
13114Round bucket for 1 glass tube for mineral oil 100 ml, 6"", Ø 44 x 165 mm, following former ASTM D 96 no. 15132, incl. rubber cushion no. 16104
£1,071.00
£685.00
ADD
13116Round bucket for 1 glass tube for mineral oil 100 ml, pear-shaped, Ø 59 x 160 mm, following former ASTM D 96 no. 15131, incl. rubber cushion no. 16106
£1,119.00
£716.00
ADD
16103Adapter for glass tube for mineral oil 100 ml, 8" no. 15130, incl. rubber cushion 16015, 1 set = 2 pcs
£123.00
£80.00
ADD
16104Rubber cushion for glass tube for mineral oil 100 ml, 6" no. 15132, 1 set = 2 pcs
£123.00
£80.00
ADD
16106Rubber cushion for glass tube for mineral oil 100 ml, pearshaped, no. 15131, 1 set = 2 pcs
£123.00
£80.00
ADD
Fixed Angle Rotors
Product CodeDescriptionList PriceOffer Price
12168Angle rotor 20 x 10 ml, for tubes e.g. no. 15000, 15010, 15039, incl. hermetic aluminium lid no. 17846
£3,103.00
£1,982.00
ADD
12170Angle rotor for 12 x 15 ml culture tubes e.g. no. 15115, incl. hermetic aluminium lid no. 17859
£3,275.00
£2,091.00
ADD
12172Angle rotor 12 x 30 ml, for tubes e.g. no. 15029, 15030, 15032, incl. hermetic aluminium lid no. 17845
£2,827.00
£1,805.00
ADD
12174Angle rotor for 24 x 15 ml culture tubes e.g. no. 15115, incl. hermetic aluminium lid no. 17883
£3,763.00
£2,351.00
ADD
12201Angle rotor 100 x 1.5/2.0 ml, for e.g. reaction vials e.g. no. 15008, 15040 (2 lines, angle 45°), incl. hermetic aluminium lid no. 17896
£5,144.00
£3,285.00
ADD
12265Angle rotor 6 x 85 ml, Biosafe certificate, for tubes no. 13085, 15076, 15080, incl. bayonet lid no. 17607
£2,699.00
£1,724.00
ADD
12266Angle rotor 8 x 50 ml, Biosafe certificate, for tubes no. 13055, 15051, 15052, incl. bayonet lid no. 17605
£2,429.00
£1,553.00
ADD
12269Angle rotor for 8 x 50 ml, Biosafe certificate, culture tubes e.g. no. 15151, incl. bayonet lid no. 17604
£3,168.00
£2,024.00
ADD
12356Angle rotor 6 x 250 ml, Biosafe certificate, for bottles no. 13255, 15247, 15249 and adapters 14122 - 14134, incl. bayonet lid no. 17603
£5,688.00
£3,633.00
ADD
12449Angle rotor 48 x 1.5/2.0 ml, Biosafe certificate, for reaction vials no. e.g. 15008, 15040, incl. bayonet lid no. 17612
£2,633.00
£1,682.00
ADD
12450Angle rotor 24 x 5 ml, Eppendorf reaction caps, Biosafe certificate, incl. bayonet lid no. 17614
£2,633.00
£1,682.00
ADD
12600Angle rotor 6 x 500 ml, Biosafe certificate, for bottles no. 13507, 15508 and adapters no. 14144 - 14155, incl. bayonet lid no. 17600, incl. torque wrench set no. 17060
£11,773.00
£7,512.00
ADD
Adapters for Fixed Angle Rotors
Product CodeDescriptionList PriceOffer Price
13000Adapter for reaction vials 0.25/0.4 ml no. 15014 1 set = 2 pcs
£12.00
£7.00
ADD
13002Adapter for reaction vials 0.5/0.75 ml, Ø 7.9/10 x 28/31 mm, e.g. no. 15005 1 set = 2 pcs
£12.00
£7.00
ADD
13021Adapter for PCR-tube 0.2 ml, e.g no. 15042, 1 set = 2 pcs
£12.00
£7.00
ADD
13059Adapter for 1 round bottom tube 10 ml, max. ÕÉ 16.2/19 x 75 - 85 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs.
£174.00
£112.00
ADD
13060Adapter for 1 culture tube 15 ml no. 15115 1 set = 2 pcs
£77.00
£49.00
ADD
13062Adapter for 1 Greiner tube 15 ml, ÕÉ 17/22 x 95 - 100 mm, 1 set = 2 pcs.
£111.00
£70.00
ADD
13079Bottomadapter for 1 tube 50 ml, e.g. no. 15051, 15052, 1 set = 2 pcs
£93.00
£59.00
ADD
13080Adapter for 1 culture tube 50 ml, e.g. no. 15151, 1 set = 2 pcs.
£161.00
£104.00
ADD
13082Adapter for 1 tube 50 ml, max. ÕÉ 28.8 x 105 - 115 mm, e.g. no. 13055, 15051, 15052, 1 set = 2 pcs.
£161.00
£104.00
ADD
13083Adapter for 1 tube 30 ml, max. ÕÉ 25.5 x 90 - 100 mm, e.g. no. 15029, 15030, 15032, 1 set = 2 pcs.
£161.00
£104.00
ADD
13084Adapter, for 2 tubes 10 ml, ÕÉ 16/17.5 x 75 - 90 mm, e.g. no. 15000, 15010, 15039, 1 set = 2 pcs.
£161.00
£104.00
ADD
14122Adapter for 9 reaction vials 1.5/2.0 ml, max. ÕÉ 11 mm, e.g. no. 15008, 15040, 1 set = 2 pcs
£272.00
£174.00
ADD
14124Adaptor for rotor 12258 - 6 x 10 ml
£272.00
£174.00
ADD
14125Adapter for 4 culture tubes 15 ml, cap max. Ø 23 mm, e.g. no. 15115 Nunc, Falcon, Greiner, Corning tubes, 1 set = 2 pcs
£272.00
£174.00
ADD
14127Adaptor for rotor 12258 - 2 x 30 ml
£272.00
£174.00
ADD
14129Adaptor for rotor 12258 - 1 x 50 ml
£272.00
£174.00
ADD
14131Adaptor for rotor 12258 - 1 x 50 ml Culture
£272.00
£174.00
ADD
14134Adaptor for rotor 12258 - 1 x 85 ml
£271.00
£174.00
ADD
14144Adaptor for rotor 12505 - 8 x 10 ml
£339.00
£218.00
ADD
14146Adaptor for rotor 12505 - 3 x 30 ml
£339.00
£218.00
ADD
14148Adaptor for rotor 12505 - 2 x 50 ml Culture
£339.00
£218.00
ADD
14149Adaptor for rotor 12505 - 5 x 15 ml Culture
£339.00
£218.00
ADD
14150Adaptor for rotor 12505 - 2 x 50 ml
£339.00
£218.00
ADD
14151Adaptor for rotor 12505 - 12 x 1,5 - 2,2 ml
£339.00
£218.00
ADD
14153Adaptor for rotor 12505 - 1 x 85 ml
£339.00
£218.00
ADD
14155Adaptor for rotor 12505 - 1 x 250 ml
£339.00
£218.00
ADD
16018Rubber adapter for glass tubes 15 ml no. 15015, 15022 and 15085, 1 set = 2 pcs.
£129.00
£82.00
ADD
16019Rubber adapter for glass tubes no. 15015, 15022 and 15085, 1 set = 2 pcs.
£133.00
£84.00
ADD
16030Rubber adapter for glass tube no. 15025, 15033 and 15086, 1 set = 2 pcs.
£80.00
£51.00
ADD
Get in touch with us on 0114 224 2257

Need further assistance or can't find what you're looking for? Please complete all details of your enquiry and we will get back to you shortly.

  • I would like to receive updates about products & services, promotions,special offers, news & events from SciQuip Ltd.

Certified to ISO9001 & ISO14001

MORE

SciQuip Supports
Microscopes
From £150
TITAN Pipette Filler
Special Offer £115
SciQuip Vortex Mixers
From £84

If you're unable to find the scientific or medical laboratory equipment supplies you're looking for, please do not hesitate to contact SciQuip Technical Sales Support on 0114 224 2257 or by email at info@sciquip.co.uk