Cleaver OmniPAC MAXI Power Supplies

Key Features:

• 2.4” TFT Display
• Constant voltage / Current and Power
• Pre-setting: up to 6 step, 30 programmable files
• Built-in Alarm

Product Description:

POWERPRO3AMP

The PowerPro3AMP at 300V, 3000mA, 300W, is designed for virtually all high current electrophoresis applications. The PowerPro3AMP’s higher current output capability is perfect for electroblotting units with high-intensity plate electrodes, particularly the Cleaver Scientific omniBLOT maxi, VS20 WAVE and semi dry blotting systems.

Electrotransfers may be performed as timed runs in constant or programmable mode to prevent overheating and buffer depletion. A run time extendable to a maximum 999 minutes in constant mode is also useful for overnight transfers undertaken at constant low current in wire electrode systems.

The PowerPro3AMP shares the built-in protocol and constant parameter features of the other PowerPro models.

The PowerPro3AMP is the ideal power supply for the following:

Vertical Electrophoresis using omniPAGE Maxi.

Blotting using omniBLOT and semi-dry blotters.

Supplied with a 12 month limited warranty.

POWERPRO500

The PowerPro500, with a maximum 500V, 800mA and 300W voltage, current and power output, is an excellent general-purpose power supply that fits the broadest range of electrophoresis applications, and can run as many as four units under a constant or programmable setting. It has the capacity to store up to 30 programmed files, each with 6 steps. This makes the PowerPro 500 perfect for techniques that benefit from subtle and gradual stepwise changes in the electrical parameters as the run progresses, such as DGGE and large format vertical PAGE using Cleaver Scientific VS20-DGGE and WAVE systems.

The PowerPro500 also has built in pre-set protocols from running each of Cleaver Scientific’s electrophoresis systems, and allows users to create and save protocols for their own systems. A 2.4” TFT-LCD Screen displays the current running parameters and allows the user to browse pre-set and saved protocols. The convenient pause/resume key allows any run to be temporarily halted for inspection of the gel and restarted from the same position.

The PowerPro500 is the ideal power supply for:

• Routine horizontal electrophoresis using multiSUB Mini, Midi and Choice.
• Vertical Electrophoresis using omniPAGE Mini.
• Cleaver Scientific DGGE.
• Vertical Electrophoresis using omniPAGE Maxi.

Supplied with a 12 month limited warranty.